Color-matched to your trim
Stocked finishes in black, white, bronze, brown and gray — or a custom match measured against your actual trim.
The hardware
Invisible by day. That’s engineering.
The aluminum trackwork that makes permanent lights invisible by day — matched to your trim, wiring hidden inside.
Matched to your trim
Anodized aluminum
Wiring fully concealed
5 out of 5 stars.
Very professional service, love the clean lines and the variety of designs.— David H. Burbridge, Google review
Why it disappears
Invisible by day is a manufacturing choice.
The reason a premium permanent install disappears in daylight isn't magic — it's channel. Every Sparkled install starts with measuring your home's trim color and matching it to an aluminum channel finish. The 30mm RGBW pucks mount recessed inside, wiring runs concealed, and from the street the system reads as trim until the sun goes down.
The daylight test
Find the lights in this photo.
This is a finished install, shot from directly underneath on a gray November afternoon — the least flattering angle and light we could give it. The fascia on this Roy home is dark, so the channel we installed is dark: same line, same sheen, reading as part of the trim it sits against. The round lenses are the 30mm RGBW pucks, recessed inside the channel. From the sidewalk you would walk past this house every day and never know it was wearing a lighting system — which is exactly the standard a permanent install should be held to.
What separates good channel work
Four things a cheap install skips.
Stainless steel fasteners
Rated for fascia and roofing materials, so mounting the channel never compromises the roof.
Concealed wiring
Every cable runs inside the channel — no drooping cords, no exposed junctions.
Clean corners and rakes
Mitred transitions at every corner and gable — the detail neighbors notice without knowing why.
The finished detail
Corners and rakes are where the work shows.
Channel quality plus 12" bulb spacing is the whole premium-install formula. See both on the Permanent Christmas Lights page — pricing included.
In the truck, not in a catalog
Six finishes on one commercial run.
This photo is the swatch fan made real: white, almond, silver, brown, bronze and black channel stacked in the truck bed, cut for a commercial run of six buildings plus a large Kaysville job. Matching isn't a per-house novelty — every job on the schedule gets its channel chosen against its own trim before we load it. That's why a commercial install across six different facades can disappear by day on all six.
When stock channel isn't enough
This garage has gutters big enough to hide a light show.
The Roy home in our daylight-test photo had one more problem worth showing: oversized gutters above the garage, deep enough that lights mounted at the normal fascia line would have glowed into the back of a gutter instead of down the street. So we had custom channel made for that run — a profile that carries the pucks just below the gutter's lip. By day it reads as part of the gutter's own shadow line; at dusk the bulbs clear the metal and the garage gets the same clean glow as the rest of the roofline. Matching color is the everyday job; when a house needs channel that matches its geometry too, we have it made for that run.
The jump nobody notices
A customer took this picture. That's the review.
This close-up came from a Roy customer's own phone, and it catches the hardest detail of channel work mid-flight: a jump between rooflines. Wherever the roof breaks, the cable has to cross the gap — and a cheap install lets it droop there in plain sight. Ours crosses in conduit, turned and tucked tight to the trim line, and once the channel goes on, the jumper is concealed inside it entirely — the second photo shows that finished state. Jumps are even itemized on the published quote — priced in the open, hidden on the house. And the customer who took this photo? Here's what he wrote:
“The light tracks match my soffit color perfectly. And his craftsmanship in cutting and molding the light tracks to match my roof outline was done with precision.”
— Bob Nightingale, Roy, UT · Google review · read it with the rest
Common questions
Channel, answered.
Don’t see your question? Call or text us at (801) 295-9551. We’re friendly, fast, and we don’t do pressure.
What is color-matched channel?
Aluminum track, finished to match your home's trim, that the LED pucks mount inside. Every Sparkled permanent install starts with matching your trim color to a stocked channel finish — black, white, bronze, brown, gray — or a custom match. The pucks sit recessed inside it and all wiring runs concealed, so by day the system reads as a clean trim line.
Why aluminum instead of plastic?
Utah sun and Utah winters. Aluminum channel holds its shape and finish through UV and freeze cycles where plastic yellows, warps and gets brittle — and it mounts with stainless steel fasteners rated for fascia and roofing. Cheap systems use plastic clips or adhesive strips that peel.
Can you match an unusual trim color?
Yes — beyond the stocked finishes we can custom match your trim. The photos on this page show the swatch range.
Where do the wires go?
Inside the channel. No cords draped along the soffit, no junction boxes hanging off the fascia. Concealed wiring is half of why the system disappears by day.
Match it to your trim
Free onsite quote — we bring the swatches.
★★★★★
5.0
from 20+ verified Google & Facebook reviews