Budget-minded
The same lights and the same app as our permanent system, at a lower starting price. Nothing about the light itself is downgraded.
From $1,300 · ~30% less
Patented · Certified dealers only
SmartClip LED lighting. Permanent lights, 30% less.
SmartClip LED Lighting — the same premium RGBW smart lights as our permanent system, mounted with patented InvisiClips. Built for budget-minded homeowners, renters and HOA neighborhoods.
Patented — dealers only
From $1,300 · ~30% less
IP68 · 5-year warranty
5 out of 5 stars.
I had a tight budget and they sent me an estimate and when done I paid way less… came home from work and had the most beautiful lights in the neighborhood.— Queen B., Roy, UT
Who SmartClip is for
Premium smart lighting, without the full commitment.
SmartClip exists for homeowners who want real permanent smart lighting without the full channel investment — and for the situations where channel isn’t the right fit.
Renting
Clips install without altering the fascia, so there’s nothing to explain to a landlord and nothing permanent left behind.
No fascia alteration
HOA-restricted
Low-profile clips tuck under the eaves with color-matched cable. From the street by day, there is very little to see.
Discreet by daylight
Moving soon
Not sure this is the forever house? The system can come with you rather than staying behind as someone else’s upgrade.
It can come with you
The patent moat
The patent
The dealership
The training
A mounting system other installers legally cannot offer.
SmartClip LED Lighting is installed with patented InvisiClips — a mounting system available only to certified authorized InvisiLights dealers like Sparkled. Made from UV-stable, impact-resistant plastic, SmartClips come in variants engineered for virtually any roofline — the same flexibility as traditional Christmas lights, but permanently installed with our RGBW smart LED pucks. Other permanent lighting installers literally cannot offer this system.
Patent-protected
The SmartClip system is patented by the owner of InvisiLights. No other permanent lighting company can legally install it.
One of the first certified dealers
Sparkled Lighting is one of the first certified authorized InvisiLights dealers in the country — and the first dealer listed on InvisiLights’ own installer page.
We teach the technique
Our founder is featured in InvisiLights’ national training program, teaching other installers across the country how to do this work correctly.
Nothing about the light changes
The lights are identical. Only the mounting is different.
The RGBW LED pucks, the controller and the app are the same hardware we install on a full permanent system. SmartClip is a different way to attach them — not a cheaper light.
- Year-round smart lighting — accent, holiday, security, game day, or special occasion.
- Premium RGBW LED lights — 16.7 million colors, a true white spectrum from a dedicated warm-white chip, and dozens of special effects.
- Smartphone controlled app — myLights customizes and fully automates your lights your way.
- Product & service warranty — IP68 water- and dust-proof hardware, with a 5-year SmartClip warranty.
Installed at our 12" pro spacing standard, the same as every other Sparkled service — so every bulb stays a distinct point of color instead of blurring into a streak.
What it looks like switched off
A low-profile line under the eave, not a light show.
SmartClips mount the way traditional Christmas light clips do, with the cable color-matched to your soffit. It doesn’t vanish the way aluminum channel does — that is honestly the trade — but from the street it reads as a service line, not decoration.
- Color-matched cable — matched to the soffit or fascia it runs against.
- UV-stable, impact-resistant plastic — the same proprietary material as InvisiLights’ “Best Clip,” so it doesn’t go brittle in the sun.
- A clip for virtually any roofline — the SmartClip family covers the orientations a traditional Christmas light can be installed on, where other permanent systems struggle.
- Nothing cut into the fascia — which is what makes it work for renters and HOA neighborhoods.
Want the version that disappears completely? That’s color-matched aluminum channel on our Permanent Christmas Lights.
Try it right now
This is myLights — the actual app, running live.
Every SmartClip and permanent install is controlled from myLights. Don’t take our word for how it feels. Tap the phone, change the colors, browse the displays — it’s the real thing, not a video.
- 16.7 million colors and dozens of special effects, per section of roofline.
- Schedules that run themselves — sunset timing, holidays, away mode.
- Paint your own patterns and save them as displays you can recall in a tap.
SmartClip vs Permanent
An honest comparison, not an upsell.
Both services use the same RGBW LED hardware and the same app. Choose on mounting, budget, and how long you’ll be in the home.
What differs
SmartClip LED Lighting
Permanent Christmas Lights
Mounting
Patented InvisiClips, color-matched cable
Color-matched aluminum channel
Wiring
Color-matched, low profile
Fully concealed inside the channelPermanent wins
Daytime look
Discreet under the eaves
Reads as a clean trim linePermanent wins
Warranty
5 years
Lifetime product warrantyPermanent wins
Starting price
$17–$21+/ft · from $1,300~30% less
$25–$30+/ft · from $2,000
Renting, HOA, or moving soon
Built for it — nothing cut into the fasciaSmartClip wins
Designed to stay with the house
Lights & app
Identical RGBW pucks, same app
Identical RGBW pucks, same app
Want the full channel story? Read about our color-matched aluminum channel, or compare everything on the Permanent Christmas Lights page.
Pricing
The same lights, about a third less.
Published up front, because you shouldn’t have to sit through a sales call to find out whether you can afford it.
Versus permanent channel
~30% less
Per linear foot, installed
$17 – $21+
Where the saving comes from
Not the light. The RGBW pucks, the controller and the app are the same hardware we install on a full permanent system — the difference is patented clips instead of cut, color-matched aluminum channel, which is the expensive half of a permanent install.
Permanent runs $25–$30+ per linear foot; SmartClip runs $17–$21+. On a typical front-and-sides roofline that is roughly $1,500 back in your pocket for the same lights on the same house.
Small · front only
Front roofline
80–120 linear feet of roofline
$1,300 – $2,500
Installed · permanent channel would be $2,000 – $3,500
- Front roofline coverage
- Patented InvisiClips, color-matched cable
- RGBW LEDs at 12-inch spacing
- myLights app + controller
- 5-year SmartClip warranty
Mid-size · most common
Front & side, or two-story
140–200 linear feet of roofline
$2,500 – $4,000
Installed · permanent channel would be $3,500 – $6,000
- Front + side rooflines
- Patented InvisiClips, color-matched cable
- RGBW LEDs at 12-inch spacing
- myLights app + controller
- Works on rentals and under HOA rules
- 5-year SmartClip warranty
Large · full wrap
Full perimeter coverage
240–400+ linear feet — dormers, peaks, garage
$4,000 – $8,500+
Installed · permanent channel would be $6,000 – $12,000+
- Full perimeter + accent areas
- Multiple zones, scheduled separately
- RGBW LEDs at 12-inch spacing
- myLights app + multi-zone controller
- 5-year SmartClip warranty
What the per-foot rate does not include. The controller and any jumps — breaks in the roofline the cable has to cross — are itemized on your quote rather than buried in the rate. Seasonality and how many areas you light move the number too. Your exact figure comes from a free onsite measure, with no obligation.
100+ Utah homes and counting
The clip is the reason more of them said yes.
Bob in Roy, Janice in Clinton, Shaylee in Tremonton, Kevin in Syracuse — and 96 others across Northern Utah. Same lights, same app, three steps: quote, walk-through, install.
★★★★★
5.0 from 20+ Google & Facebook reviews
Proof you can drag
The same SmartClip house, day and night.
One real Layton install, photographed in daylight with the system already on the roofline, then again after dark in solid blue. Slide between the two — the daytime footprint is the honest part of this page.
Drag the handle to compare
The neighbor test
"So when do the lights go up?"
True story from this West Point install: while we were finishing up, a neighbor wandered over to chat and asked whether we'd be putting lights on the house — standing in front of a roofline that already had them. When we pointed at the clips, he had to step in close before he believed they were really there. That's the daytime footprint argument settled by an unpaid witness: from where a neighbor actually stands, SmartClip reads as no lights at all until you switch them on.
Think you'd have spotted them? Tap the photo and zoom in as close as you like — the clips are there, on every roofline.
Same bulbs, any mood
Every color SmartClip can wear, on a real house.
This Clearfield home runs our permanent channel system — but the RGBW bulbs are identical to the ones SmartClip clips to your roofline. One evening, one homeowner scrolling looks in the app. Tap through a few.
Common questions
Everything you’re wondering — answered straight.
Don’t see your question? Call or text us at (801) 295-9551. We’re friendly, fast, and we don’t do pressure.
What is SmartClip LED Lighting?
SmartClip LED Lighting is permanent smart lighting installed with patented InvisiClips instead of aluminum channel. The clips mount to your eaves the way traditional Christmas light clips do — but they hold the same premium RGBW LED pucks as our Permanent Christmas Lights, controlled from the same smartphone app, with 16.7 million colors and dozens of effects.
How is SmartClip different from Permanent Christmas Lights?
The hardware — the RGBW LED pucks, the controller, the app — is identical. The difference is the mounting. Permanent uses color-matched aluminum channel with fully concealed wiring and a lifetime warranty. SmartClip uses patented clips with color-matched cable and a 5-year warranty, at a lower price. If you want the install to disappear completely by day, choose Permanent; if you want the same smart lighting at an accessible price — or you rent, plan to move, or live under an HOA — SmartClip is built for you.
Why can’t other companies offer SmartClip?
The SmartClip mounting system is patented by the owner of InvisiLights, and only certified dealers can install it. Sparkled Lighting is one of the first certified dealers — the first listed on InvisiLights’ own installer page.
How much does SmartClip LED Lighting cost?
SmartClip runs $17–$21+ per linear foot installed — roughly 30% less than the same lights in permanent aluminum channel, which runs $25–$30+. A front-only roofline (80–120 ft) is $1,300–$2,500; a front-and-side or two-story (140–200 ft) is $2,500–$4,000; a full wrap (240–400+ ft) is $4,000–$8,500+. The controller and any jumps are itemized separately. See our pricing page for how the ranges work, then request a free onsite quote for an exact number.
Can SmartClip lights stay up year-round?
Yes. SmartClips are made from UV-stable, impact-resistant plastic — InvisiLights’ proprietary “Best Clip” material — and the RGBW pucks are IP68 waterproof and dustproof. Accent lighting in summer, team colors on game day, orange in October, full Christmas in December.
Ready for smart lighting your neighbors can’t have?
Free, no-obligation onsite quote — SmartClip is only available from certified InvisiLights dealers. Call, text, or tap the button, whichever’s easiest.
★★★★★
5.0
from 20+ verified Google & Facebook reviews